FEP400 PRESS prices inc. gst
The FEP400 press can be mounted on a table top as its weight when fitted with a composite or P.V.C. bed is under 70kg’s, but like all presses, the printmaking process is made easier when the artist has access to the press from all sides. When customers have asked me about portable presses for workshops this and the A4 are the models I recommend. Two people can easily carry the 400 but always remove the bed before hand. The stand that goes with this model can also be fitted with castors, safety strap and a bottom shelf for storing tools etc. The 400 is made from 5mm x100 plated steel sides and solid steel, 75mm diameter top roller and 70mm bottom roller .Only the best Japanese bearings are used in the roller mechanism.
Retail Price inc. GST. $2689.30
(price includes FEP401 Press, 650mm diameter hand wheel, Safety Strap and 12 x 400 x800 Steel bed
FEP405 or FEP405F.P Stand. A fully welded stand or, if we are freighting the press to you, an easily assembled flat pack. The stand is designed so that each press is 90cm bed to ground height ,but if you have special requirements let us know and the stand can be customized to suit your needs. We provide the necessary tools for any assembling.
FEP401 PVC Bed. 400 x 800 x 15mm , industrial grade PVC.fitted with brass stops
FEP402 Composite PVC Bed. 400 x 800 x 15mm , industrial grade PVC.fitted with brass stops
FEP403 Steel bed. 400mm.x 800 x 12, wash ground plate steel, fitted with brass stops.
FEP109 Safety strap. 50mm.wide safety strap, easy to install. We don’t like to sell the steel beds without the strap, it’s a very low extra cost and whether you are a school or a private studio this will prevent the bed ever rolling off the press.
FEP406 Lower shelf. 6mm marine ply, fitted, screwed down and sealed with polyurethane for protection and easy cleaning.
FEP107 Castors. 2 rigid and 2 swivels with brakes rated at 125kg. per wheel. If you need to move the press at the end of a session you can leave everything as it is on the press and push it to the side. The castors are screwed on so if you ever decided to permanently fix the press to the floor, no problem.